The system adopts primary pure water for lab cleaning and pure water for analysis and can replace time-consuming, power-consuming, water-consumping and inefficient traditional distilled water machine. Pressure barrel is optional. The system supplies water for most chemical and biological experiments, regular production process,labware cleaning, UP water system, autoclave sterilizer and environmental test chamber.
● Sheet metal housing is durable and elegant
Sheet metal housing is durable and elegant and adopts ergonomic design and water-power separated structure; ● Full-automatic microcomputer control system and LCD display working condition in real time; ● Quick external water inlet is easy to install; ● The system functions on protection from dry-run operation and auto shutdown under high-pressure flooding as well as sound-light alarm. Pure water pipe and joint have passed NSF certification; ● 24VDC is used as the main power according to safety code. Water-power separated structure adapts to humid environment, avoids damaging human body and produces ultralow rediation. The system adopts advanced EMC design and features strong interference immunity and low noise. ● 160*80*390mm integrated two-column purified module. ● The whole column is made of edible PP. ● Hot melt machine enables once forming and no adhesives and impurities will be separated out. ● The system is internally installed with 3L American Dow purified precise resin imported with original packaging. ● The effluent quality reaches up to 13-17.5MΩ.cm.
GREEN-Q1 Technical Parameter List
Product Type GREEN-Q1 Influent Requirement* Urban tap water: TDS<200ppm, 5-45°C, 1.0-4.0Kgf/cm3 (if influent TDS>200ppm, external softener is recommended) System Process** PF +RO+ DI Indexes of DI Water: Resistivity 13-17.5MΩ.cm@25°C Heavy Metal Ion <0.1pbb PM (>0.2μm) <1/ml RO Indexes: Ion Rejection Rate 96%-99% (when new RO film is used) Organic Rejection Rate >99% (when MV> 200 Dalton) PM and Bacteria Rejection Rate >99% Water Yield (25°C)*** 5/10L/H Instantaneous Water Yield 1.5-2.0L/min (pressure barrel is needed) Water Outlet 2PCS.: RO water, DI water Size/Weight (W*D*H) 415×370×480mm/ about 19Kg Power Supply/Power/Noise 220V50HZ/ 50-80W/ <50db Standard Configuration Host (including 1 set of purified column) +external 12L pressure barrel+ accessory bag
>Influent quality will affect the quality of pure water and the service life of purified column >PF: Pretreatment PP: Integrated PP cotton UDF: Integrated activated carbon RO: Reverse osmosis DI: Ion exchange UV: UV lamp sterilizer UF: Ultra filter TF: Terminal filter >Influent TDS=200ppm, 25°C, measured at 50psi and when the recovery ratio is 15%
Influent of UP water system, cleaning of glassware, microbiological analysis, sample dilution and reagent preparation, production process water, general chemistry and qualitative analysis, water analysis and general HPLC and spectrophotometry as well as water supply of autoclave sterilizer, cleaner, constant temperature humidity chamber, salt spray test chamber, aging tester and humidifier